Camloc Tension Latches 65L Series

Centering Washer

Shipped unassembled with each pawl latch.

65L series latche

Material

Part No.

Weight Per Piece (lbs.)

Steel (Cadmium Plated, Gold Chromate)

65L4-1AA

.003


Panel Preparation and Installation Data

Clockwise (Right Hand) Locking

clockwise locking

Clockwise (Left Hand) Locking

clockwise locking
  1. Locate and form clearance hole .760/.750 Diameter Reference.
  2. For clockwise (right hand) locking: locate torque lug cut out in panel 135° counterclockwise from desired pawl position when locked. Form torque lug cut out .130/.127 Diameter Reference.
  3. For counterclockwise (left hand) locking: locate torque lug cut out in panel 45° counterclockwise from desired pawl position when locked. Form torque lug cut out .130/.127 Diameter Reference.
  4. Position pawl in extreme open position and insert pawl end into mounting hole.
  5. Push entire latch through hole, taking care to position torque lug in cut out.
  6. Slip centering washer over flats on threaded housing. Be sure that nibs on washer penetrate mounting hole to accomplish centering.
  7. Tighten hex nut.
65L operating diagram

To Operate:

  1. Rotate actuator knob 1/4-turn to lock. Keep rotating actuator to increase clamping force.
  2. To unlock, rotate actuator 1/4-turn in opposite direction.
H-47
Overview H-1 Typical Applications H-2 Electronic Equipment H-3 Tension Latches H-4 Tension Latches H-5
Light Duty Tension Latches H-6 Light Duty Tension Latches H-7 30L Series H-8 34L Series H-9 95L Series H-10
96L Series H-11 47L Series H-12 Custom Latches H-13 Medium Duty Latches H-14 Medium Duty Latches H-15
20L Series H-16 20L Series H-17 20L Series H-18 29L Series H-19 51L Series H-20
51L Series Specs H-21 51L Series Strikes H-22 51L Installation Data H-23 69L Series Features H-24 69L Series Strikes H-25
When to Use Latches H-26 Heavy Duty Tension Latches H-27 17L Series H-28 18L Series H-29 37L Series H-30
37L Series Specs H-31 37L1/37L11/37L25 H-32 37L Strikes/Specs H-33 37L Attachments H-34 37L Seam Data H-35
137L Series H-36 46L Series H-37 49L Series H-38 46L/49L Installation H-39 58L Series H-40
58L Installation H-41 Pawl Latches H-43 64L Series H-44 64L Installation H-45 65L Series H-46
65L Installation H-47 106L Features H-48 106L Series H-49 106L Installation H-50 106L Attachments H-51
122L/123L Series H-52 122L Series H-53 123L Series H-54 122/123L Installation H-55 Panel Latches H-56
Actuated Latches H-57 KM610/KM680 Series H-58 KM610/KM680 Installation H-59 118L Series H-60 118L Installation H-61
104L Series H-62 PT104L Series H-63 119L Series H-64 119L Installation H-65

 

Home Page | About Us | Services Offered | Line Card | Ordering Info | Site Map | Terms & Conditions | Search Our Inventory | Product Specialties | Our Thoughts | Quick RFQ | Privacy Policy | Contact Us

JetTek Web Site All Rights Reserved - 2006-2011